永旺彩票The working efficiency of the coating production line is affected by those factors

Coating equipment, working environment, coating management, coating process and materials are directly related to the production efficiency of the coating line. In this process, the process layout of the coating equipment has an important impact on the use of the coating assembly line. Let's understand the typical errors of the process layout of the coating equipment.

1. The output design guidelines cannot be reached

 Some designs do not consider the hanging method of painting equipment (different hanging methods should be considered for different painting pendants), the spacing of the hanging, the interference of the up-and-down slope, the horizontal turning distance, and the production time. Consider the scrap rate, the utilization rate of coating equipment, the peak production capacity of the product, and so on. This will cause the output to fall short of the design guidelines.

Second, there is a deviation in the process time of the coating equipment

Painting production line

In order to reduce the cost, some designers often achieve their goals by reducing the process time. Generally, the common ones are as follows: 1. The pre-treatment transition period of the coating production line is not enough time, which will cause liquid leakage; 2. The specific heating time is not considered during curing, resulting in poor curing; 3. The spray paint leveling time is not enough, thus causing The paint film leveling is not enough; 4. The cooling time after curing is not enough, so that the workpiece is overheated or not fixed enough during painting (or the next part).

3. Improper design of conveying equipment

永旺彩票From a design point of view, there are many ways to convey this workpiece. If the design is not appropriate, it is easy to have negative consequences for production capacity, process operations, and upper and lower parts. Suspended chain conveying is common, and its load capacity and traction capacity need to be calculated and interfered with drawing. The speed of the chain also has corresponding requirements for the matching of equipment. Painting equipment also has requirements for the stability and synchronization of the chain. When designing, these aspects must be considered properly.

永旺彩票Fourth, improper selection of coating equipment

Because different products have different requirements, equipment selection is also different, and various coating equipment have their advantages and disadvantages. If the design cannot be explained to the user, the coating line will be found to be very unsatisfactory to the customer after the manufacturing is completed. For example, air curtains are used to insulate powder spray drying tunnels, and cleanliness requirements are not installed with purification equipment. Such errors are common errors in the process layout of coating equipment.

永旺彩票5. Improper selection of process parameters of coating equipment

Generally speaking, it is more common for this coating production line to select wrong process parameters. One is the improper selection of design parameters for a single coating equipment, the other is insufficient attention to the compatibility of the equipment system, and the third is no design at all.